This is a study done at the Swedish Defence Research Agency with the purpose to design and investigate how different geometries of a compression surface integrated with an intake affects the performance such as distortion, boundary layer diversion, pressure recovery and deceleration of speed.
The work was divided in two parts. In the first part, CFD calculations using the FOI developed Edge 4.1 code were made for the compression surfaces alone. In the second part the most promising design was integrated with an intake.
Two more bumps with the intake were modelled and the three geometries were compared to the intake without bump. Surface flow, deceleration of Mach number, pressure recovery, mass flow, boundary layer diversion, lift and drag were the factors chosen to be examined, boundary layer diversion and pressure recovery being the two most vital.
Source: Linköping University
Author: Svensson, Marlene
